| Application | Cleanroom supply air or return air |
| Type | EPA-HEPA filter for turbulent environments |
| Media | Waterproof micro glass fibers |
| Gasket | 2 component polyurethane endless seal |
| Separator | Thermoplastic hotmelt |
| Frame | Extruded anodized aluminium |
| Faceguard | Mild steel epoxy coated (optional) |
| Filter Classification | E10 - H14 |
| Velocity (m/s) | 0.75 - 2.25 |
| Initial Pressure drop (Pa) | See table, used air velocity other than the nominal velocity may increase or reduce efficiency and initial resistance |
| Temperature (max) | 70 °C in continuous operation |
Certification
TripleAir Technology maintains a policy of continuous product research and improvement, and retains the right to change product specification and design without notice. © 2013.01 TAT
Technical Data
Style code |
Dimensions WxHxD (mm) | Filter classification EN1822 | Nominal air flow (m/s) | Airvolume (m³/hr) | Initional pressuredrop (Pa) |
| TA-2-PAK-13-G1-F0-ALN | 305x610x78 | H13 | 0.75 | 500 | 270 |
TA-2-PAK-13-G1-F0-ALN |
610x610x78 |
H13 |
0.75 |
1000 |
270 |
TA-4-PAK-13-G1-F0-ALN |
305x610x150 |
H13 |
1.25 |
830 |
270 |
TA-4-PAK-13-G1-F0-ALN |
610x610x150 |
H13 |
1.25 |
1700 |
270 |
TA-5-PAK-13-G1-F0-ALN |
305x610x150 |
H13 |
1.50 |
1000 |
270 |
TA-5-PAK-13-G1-F0-ALN |
610x610x150 |
H13 |
1.50 |
2000 |
270 |
TA-7-PAK-13-G1-F0-MTL |
305x610x292 |
H13 |
2.25 |
1500 |
270 |
TA-7-PAK-13-G1-F0-MTL |
610x610x292 |
H13 |
2.25 |
3000 |
270 |
Note: other sizes and executions available upon request
* Tolerance on pressure drop ± 15%
Recommended final pressure drop: 600 Pa
Admissible relative humidity: < 100%
Contact met TripleAir